.png)
(1) Set the maximum operating speed.
(2) Change the curve speed limit. The selected value is added to all curve speed limit based on the original rule.
(3) Change the minimum speed at the turnout. If the original speed limit is lower than this value, the limit is replaced by this value.
(4) Select the powering pattern. "Normal" is energy saving and "Fast" is time saving.
(5) Set the speed limit at the straight side of the turnout. This is applicable to the built-in track profile data.
(6) Apply settings in this tab window to all trains currently selected.
(7)Select the train to set driving conditions.
